Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Norfolk Homeowners
A broken spring is why your door suddenly feels like it weighs a hundred pounds or won’t open at all. The springs are the counterweight for the whole door, and when one snaps you’re looking at a heavy panel hanging over your car with nothing holding it up. That’s a job for someone who does nothing but garage doors. Our technicians have up to 14 years of experience with high-tension torsion and extension springs, and we carry a strong local reputation across Norfolk because we diagnose the exact spring failure instead of guessing. We offer same-day service on most spring calls in Norfolk, and the price is quoted and agreed before any work starts. Call (844) 443-3797. We answer 24/7.
What Our Garage Door Spring Repair Service Includes
Saying “spring repair” covers a few different jobs depending on what’s actually broken. Here’s what each one involves and when it applies, so you know what you’re paying for before we arrive.
Torsion Spring Replacement
A torsion spring is the coiled spring mounted on a shaft above the door, and it does the lifting by winding and unwinding as the door travels. It’s the part that usually breaks first on a door that gets used every day, and it does so without warning. We replace the failed spring with a matching torsion spring rated for your door’s weight and height, then tension it to the correct number of turns so the door balances properly.
Extension Spring Replacement
Extension springs run along the sides on a track, stretching and pulling rather than twisting. They’re common on older Norfolk doors and they fail differently than torsion springs, often stretching out of shape before they break. We match the replacement to the original spring’s weight rating and check the brackets and pulleys it pulls against, because a stretched spring usually means the hardware around it has taken a beating too.
Broken Spring Repair
This is the call where the door won’t come up, or comes up crooked, or makes a sharp bang and then stalls. The repair is almost always a full spring replacement rather than a patch, because a cracked or snapped coil can’t be safely repaired back into service. We confirm which spring broke (it’s often one of a matched pair), replace it, and check that the door moves evenly through the whole cycle.
Spring Adjustment
Spring adjustment is for a door that still opens but feels heavier than it should, drifts down on its own, or slams shut instead of settling gently. The springs have lost tension over time, and the fix is to rebalance the system to the door’s actual weight. We measure and adjust the tension so the door stays where you leave it halfway up, which is the sign of a properly balanced door.
Safety Cable Installation
Safety cables run through the center of extension springs and catch the spring if it breaks, so the pieces can’t fly across the garage. If your extension springs don’t have cables, or the cables are frayed or rusted through, that’s a gap worth closing. We install safety cables as part of an extension spring job or as a standalone safety upgrade.
Spring Inspection
A spring inspection is a close look at both springs, the cables, the drums, the brackets and the center bearing, checking for cracks, gaps in the coils, rust and wear at the winding cones. It’s the right service if your door is working but you’ve heard a sound you don’t like, or if the door is well into its service life. We tell you what’s wearing and what’s fine, so you can decide what to fix now and what can wait.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
Springs aren’t brand-specific in the way openers are, but the doors they lift are, and the door’s weight and track design tell us which spring rating fits. We service LiftMaster and Craftsman systems and know how those doors are built and where they wear, which means we’re not guessing when we match a replacement spring. The same goes for Wayne Dalton, whose door geometry sometimes calls for a specific spring length and wire gauge to balance right.
Our working knowledge covers the eight brands we see most in Norfolk garages, so you almost never hear “we don’t work on that.” Whether your door carries Raynor hardware, a LiftMaster operator, or any other make, we can diagnose the spring and get the door balanced again. If your spring is broken and you’re not sure what brand of door you have, that’s fine, we identify it on arrival.
Signs You Need Garage Door Spring Repair Right Now
Springs usually fail loudly or slowly. Here’s what to watch for, so you can tell the difference between a door that needs attention and one that needs a call today.
- A loud bang from the garage. A torsion spring breaking makes a sound like a gunshot, often followed by the door refusing to open. The door is now dead weight, so don’t force it, call us and we’ll get it lifted safely.
- The door feels extremely heavy when you lift it by hand. If you have to put your whole body into raising a door that used to lift with two fingers, the springs have lost their tension or broken. This is the single clearest sign of a spring problem.
- The door opens a few inches and stops. An opener will run a door up slightly and then reverse or stall when the springs aren’t helping. The opener isn’t the problem here, the springs are, and running the opener against dead springs can burn out the motor.
- A visible gap in the spring coils. Look at the torsion spring above the door or the extension springs along the sides, and if you see a section where the coil has separated or looks stretched, the spring is failing. That gap means it’s on its way to breaking.
- The door comes down too fast or drifts open on its own. A door that slams shut instead of settling, or creeps up when you leave it halfway, is out of balance. That’s a spring tension issue that only gets worse with use.
Our Garage Door Spring Repair Process – Step by Step
Spring work is the most dangerous repair in the trade, so the process matters as much as the parts. Here’s how a typical spring call runs, from first call to a door that’s balanced again.
- 1
We take the call and ask the right questions. We want to know whether the door is stuck open or closed, whether it’s a torsion or extension setup, and whether you can hear anything when you try the opener. That conversation tells us what to expect before we arrive and helps us come prepared.
- 2
We diagnose on site. We confirm which spring failed, measure the door’s weight and height, and check the cables, drums, brackets and center bearing for related wear. A broken spring often takes a cable or drum with it, so we look at the whole system, not just the coil.
- 3
We quote before we touch anything. You get a written estimate for the spring replacement, and anything else the inspection turned up, with the price agreed before any work starts. No surprise invoice later.
- 4
We replace and rebalance. We install the new spring or matched pair, set the correct tension, and test the door through a full open and close cycle. The door should lift easily by hand and stay put halfway up, which is how we know it’s balanced.
- 5
We walk the door with you. Before we leave, we run the door and show you the new springs, so you can see what changed and hear how a balanced door sounds. If anything about the opener or track looks off, we tell you then.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Norfolk?
Spring repair is priced per spring, and a typical spring repair in Norfolk runs $180 – $340 depending on the spring type, the door’s weight and height, and whether it’s a torsion or extension setup. Most doors use a matched pair of springs, and a pair is usually replaced together, so a pair costs about twice that range. Here’s how the common scenarios break down:
| Service | Typical Estimated Range in Norfolk |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Matched pair replacement | About twice the one-spring range |
| Cable repair | $130 – $250 |
| Garage door repair (broader) | $150 – $600 |
What moves the number: the spring type and size, the door’s weight, whether the old spring has to be cut out, and whether a cable or drum needs replacing at the same time. Higher doors with heavier panels need stronger springs, which cost more. What keeps the price honest is that the written estimate sets the final price, and we agree it with you before any work starts, so the invoice doesn’t grow once the door is open.
To avoid overpaying, get a written price before the work starts, ask whether the quote covers one spring or a pair, and confirm that the estimate includes balancing and a test cycle. Our estimates are free, and they tell you the price for the springs you actually need rather than the most expensive option on the shelf.
Garage Door Spring Repair Near Norfolk – Our Service Area
We cover spring repair across Norfolk and the surrounding area, including Portsmouth, Hampton, Chesapeake, Virginia Beach, and Newport News, plus Poquoson, Carrollton, Smithfield and Benns Church. For garage door spring repair nearby or work closer to home, we schedule around your location, with same-day service on most spring calls. We also handle the same spring work in garage door spring repair across the water. Wherever you are in the region, the price is quoted and agreed before any work starts.
Serving Norfolk, VA – Our Local Coverage Area
We serve Norfolk and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Norfolk
Garage door spring repair is replacing or rebalancing the torsion or extension springs that counterweight the door so it can be lifted by hand and by the opener. When a spring breaks, the door becomes dead weight and stops working. The repair involves installing the correct spring or matched pair, setting the tension, and testing the door balance. It’s a specialist job because the springs are under high tension.
Most residential spring repairs take about an hour once we’re on site, and a matched pair takes a bit longer than a single spring. The door works normally the same day in most cases. If the inspection turns up a cable or drum that also needs replacing, that adds time. Call (844) 443-3797 for an exact quote, estimates are free.
A typical spring repair in Norfolk runs $180 – $340 for one spring, and a matched pair is usually replaced together at about twice that range. The final price depends on the spring type, door weight and whether related hardware needs work. The written estimate sets the final price and is agreed before any work starts. Call (844) 443-3797 for an exact quote, estimates are free.
Yes, we service LiftMaster, Craftsman, Wayne Dalton, Raynor and the other major brands we handle, so you almost never hear “we don’t work on that.” We know how each brand’s doors are built and what spring rating they take. Whether it’s a LiftMaster operator or an older Raynor door, we can get it balanced. Call (844) 443-3797 to confirm your brand and book a visit.
Same-day service is available on most spring calls in Norfolk. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening. Call (844) 443-3797 and we’ll get you on the schedule.
We stand behind our spring work and will explain the warranty on the parts and labor at the time of the estimate, before any work starts. Ask about it when you call so you know exactly what’s covered. The written estimate sets out the price and the terms. Call (844) 443-3797 with your questions.
Clear the area under and around the door so there’s room to work, and don’t try to open the door by hand if it’s stuck. Leave the car outside if you can, since we’ll be testing the door. Tell us on the call whether it’s a torsion or extension setup if you know, and whether the door is stuck open or closed. Call (844) 443-3797 and we’ll walk you through the rest.
Schedule Your Garage Door Spring Repair Service in Norfolk Today
A broken spring leaves your door dead weight, and it won’t fix itself. Call (844) 443-3797 to book a spring repair in Norfolk, and we’ll diagnose the exact failure, quote the price before any work starts, and get the door balanced again. Same-day service on most calls, fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7. The estimate is free and there’s no obligation. Learn more about our full Norfolk Garage Door Repair Experts services, or read up on garage door spring repair for the details behind what we do.
Written by the team at Norfolk Garage Door Repair Experts.